Network Protocol Missing In Windows 10 11 Full Guide

Networking is a huge part of the Windows 10 experience, and one of the most annoying network problems is the one where Network Protocols are missing. This error sounds serious, so let’s see if there’s a way to fix it.

Any network consists of at least two computers that are linked in order to share resources. This simple definition of networking applies to any OS and any OS version, thus Windows 10 makes no exception.If protocols do not work as intended or worse if they’re missing, there is not much left to do with the network. Introducing one of the most annoying network related errors: Network Protocol missing.Not only does this pesky error hinder the sharing process, but in some cases it can also prevent computers from accessing the internet altogether. As inconvenient as it may sound, there are ways to fix this and we have gathered the best possible solutions in the article below.Eager to know more about Windows 10 errors and how to solve them? Find out everything there is to know in our dedicated section.
Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).
Click Start Scan to find Windows issues that could be causing PC problems.
Click Repair All to fix issues affecting your computer’s security and performance
Restoro has been downloaded by 0 readers this month.

Users report that they are unable to share files between network computers, and some are even unable to access the internet. As you can see, this problem can cause a lot of inconveniences, but there are a few solutions available.

How can I fix Network Protocol missing error in Windows 10?

Besides the Network protocol missing error, there are a few other issues that could be caused by the same culprits. For example:

Windows sockets registry entries required for network connectivity are missing
One or more network protocols are missing on this computer
Could not add the requested feature
Network protocols missing error Windows 10
One or more network protocols are missing on this computer WiFi

So, no matter the error code, you can apply the solutions from below, and (hopefully), you’ll solve the problem.

Table of contents:

Temporarily disable antivirus
Restore network protocols to default settings
Disable NetBIOS
Use Command Prompt
Use Command Prompt and sc.exe
Import Winsock keys from a different computer
Restore your router and check the cable
Use Network Troubleshooter
Restore network components
Restore network components
Update BIOS

Solution 1 – Temporarily disable your antivirus software

Although it’s not a good idea to disable your antivirus software, some users report that after disabling Kaspersky Internet Security their issues have been resolved.

So if you are using Kaspersky Internet Security, you might consider disabling it temporarily or switching to a different antivirus software. In addition, reinstalling antivirus software could also be helpful.

Don’t expose yourself to unnecessary risks. Find out why Windows Defender is the only malware barrier you need!

Solution 2 – Restore network protocols to default settings

Another thing we’re going to try is resetting network protocols to default settings. We’re going to do this by resetting the TCP/IP stack. In case you’re not sure how to do that, just follow the instructions:

Open Command Prompt as administrator.
When Command Prompt opens enter the following lines:
netsh int ip set dns
netsh winsock reset
Close Command Prompt and check if the issue is resolved.

If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look at this guide.

netsh int ip set dns
netsh winsock reset

Solution 3 – Disable NetBIOS

Go to Control Panel > Network and Internet > Network Connections.
Right click your network adapter and select Properties.
Highlight IP v4 (TCP/IP) and choose Properties.
Click Advanced.
Next go to the WINS tab, and in NetBIOS settings section select Disable NetBIOS over TCP/IP.
Click OK to save your settings.

Some users also claim that this issue is resolved by using obtaining IP address automatically instead of using a static IP. To change this setting just follow the first three steps from this solution.

As soon as you open IPv4(TCP/IP) Properties you should see the option that allows you select whether you want to use static IP address or to obtain one automatically.

You can’t open Control Panel? Take a look at this step-by-step guide to find a solution.

Can’t access IPv4 proprieties on Windows 10? Check out this guide and solve the problem in no time.

Solution 4 – Use Command Prompt

Run Command Prompt as administrator. To do so, in the search bar type Command Prompt, right click Command Prompt from list of results and choose Run as administrator.
When Command Prompt starts, type netcfg -d and press Enter to run it.
Wait for the process to complete. After the process has been completed your computer should restart and the issue should be resolved.

In addition, some users suggest using the netsh int ipv4 install command. Just start the Command Prompt as administrator like in Step 1, type netsh int ipv4 install into Command Prompt and press Enter to run it.

After that, restart your computer and see if the issue is fixed.

Solution 5 – Use Command Prompt and sc.exe

This is a temporary solution, and you might have to revert the changes after a new Windows 10 update, if the problems start occurring. Here’s what you need to do:

Open Command Prompt as administrator.
Type the following lines, and after each line press Enter to execute it:
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc.exe config mrxsmb20 start= disabled

After entering these lines into Command Prompt, the issue should be resolved. If you start to have troubles after a Windows 10 update, you might want to restore the default settings. To do so, follow these instructions:

sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc.exe config mrxsmb20 start= disabled
Open Command Prompt as administrator.
Enter these lines and after each line press Enter to run it:
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
sc.exe config mrxsmb20 start= auto

Solution 6 – Import Winsock keys from a different computer

We have to mention that this is an advanced solution, and if you’re not careful, or you don’t know how to modify a registry, don’t do it, because you can cause damage to your operating system.

sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
sc.exe config mrxsmb20 start= auto

However, should you decide to proceed, you’ll need a different computer that doesn’t have problems with Network Protocols. You don’t necessarily have to use a Windows 10 computer. Here’s what you need to do:

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.Click here to download and start repairing.

Expert tip:

Solution 7 – Restore your router and check the cable

If none of the steps above managed to solve the problem, try resetting your router. Turn it off first, and then switch it back on after a few minutes.

Additionally, you can use a different LAN cable to connect your computer to the router.

And finally, reset your router to factory settings by pressing the small button on the back (actually, the position of the reset button depends on your router).

Solution 8 – Reinstall your Network Adapter

After completing the steps from above, you might as well want to reinstall your Network Adapters. Here’s how to do that:

Hold the Windows Key and press R.
Type hdwwiz.cpl in the input field and click OK.
Expand the Network Adapters, right click on your Ethernet card, and choose Uninstall device.
When the confirmation dialog appears, click on Uninstall.
Reinstall your network adapter using the driver accompanying the hardware.

Windows can’t automatically find a driver for your network adapter? Count on us to solve the problem.

Solution 9 – Use Network Troubleshooter

If you’re running Windows 10 Creators Update (or later), you have a new troubleshooting tool, provided by Microsoft. This troubleshooting tool is designed to deal with various issues within the Windows operating system, including various network errors.

If you don’t know how to run this troubleshooter, just follow these instructions:

Go to Settings
Now, head over to Updates & security > Troubleshoot
Choose Internet Connections
Follow further on-screen instructions, and wait for the wizard to finish the process
Restart your computer

If the problem remains unresolved, you can try with the Network Adapter option, instead of Internet Connections.

If you’re having trouble opening the Setting app, take a look at this article to solve the issue.

If the Troubleshooter stops before completing the process, fix it with the help of this complete guide.

Solution 10 – Restore network components

You can also try with resetting the following network components:

Open Command Prompt as administrator.
When Command Prompt starts, enter the following commands, and press Enter after typing each command:
IPconfig /release
IPconfig /flushdns
IPconfig /renew

If you can’t flush the DNS, take a look at this step-by-step guide to solve the problem quickly.

IPconfig /release
IPconfig /flushdns
IPconfig /renew

Solution 11 – Update BIOS

And finally, some users reported that updating BIOS actually solves the problem. But before you go all in and flash your BIOS, we have to warn you that it could be a risky action, as one wrong move can render your motherboard unusable.

Only do it if you know what you’re doing.

Updating BIOS seems scary? Make things way easier with the help of this handy guide.

That’s about it, at least one of these solutions should solve your problem with Network Protocols in Windows 10. If you have any questions, or comments, just reach for the comment section below.

Fix network issuesinternet connection errorswindows 10

Email *

Commenting as . Not you?

Comment

How can I fix Network Protocol missing error in Windows 10?#

Solution 1 – Temporarily disable your antivirus software#

Solution 2 – Restore network protocols to default settings#

Solution 3 – Disable NetBIOS#

Solution 4 – Use Command Prompt#

Solution 5 – Use Command Prompt and sc.exe#

Solution 6 – Import Winsock keys from a different computer#

Solution 7 – Restore your router and check the cable#

Solution 8 – Reinstall your Network Adapter#

Solution 9 – Use Network Troubleshooter#

Solution 10 – Restore network components#

Solution 11 – Update BIOS#